Dispenses Flux
Dispenses Flux
| MANUFACTURER | Nordson |
|---|---|
| MODEL | Spectrum S-930 |
General description:
Dispense flux using non-contact jetting technique to allow proper solder oxide removal, wetting and tackiness prior to reflow
Characteristics :
- JEDEC tray input/output
- Max conveyor capacity 2.2 Kg
- Digital pattern recognition system for optical registration of the dispense site
- Compensation for rotational part misalignment +/- 7 ˚
- Field of view 7 x 5 mm
- Fluidmove software for precise control of dispensing pattern
- X-Y accuracy +/- 0.050 mm, 3 sigma(+/- 0. 076 mm fast mode)
- X-Y velocity 1 m/s, acceleration 1 g peak (S curve jerk control)
- Dispense area (X-Y) 339 x 410 mm
- Z accuracy +/- 0.025 mm, 3 sigma
- Z travel 89 mm
- Dual valve dispense control
- Tactile height sensor
- Low pressure/ low fluid sensor
- Precision fluid regulator and air assist
- DJ-2200 flux dispense jet with coaxial air technology
- Flux wet film thickness as low as 5 µm ( material dependant)
- Application rate 15 ips/sec at dispense width 5 to 7 mm
- Good pattern edge definition 0.5 to 1.5 mm
- Minimum overspray
To use this equipment
The equipment available is accessible to the academic and industrial research community.
To learn about usage conditions and availability, please fill out the form below. After reviewing your request, we will contact you shortly to offer you the best available solution.